Water quality chlorophyll grinder

型号:JXFSTPRP-YLS-02

品牌:Shanghai Jingxin

规格:Set

产品简介:HJ 897-2017 specially developed a new type of tissue grinder JXFSTPRP-YLS (patented product, counterfeit) Must be investigated! ZL2019301918692).

Product Description:

Shanghai Jingxin Industrial Development Co., Ltd., against the Ministry of Environmental Protection, has developed a new type of tissue grinder JXFSTPRP-YLS (patented product, counterfeiting must be investigated!) ZL2019301918692).

Experimental principle:

Filter a certain amount of sample with a filter membrane to trap the algae, grind and break the algae cells, extract the chlorophyll with acetone solution, measure the absorbance of the extract at 750nm, 664nm, 647nm and 630nm wavelengths after centrifugal separation, and calculate the concentration of chlorophyll a in the water according to the formula.

Application of JXFSTPRP-YLS standard method for extracting chlorophyll:

1. Filtration: Add magnesium carbonate suspension before suction filtration to prevent pigment decomposition. The negative pressure cannot exceed 50kPa.

2. Chlorophyll extraction: place the filter membrane in the JXFSTPRP-YLS extractor, add 10ml of 90% acetone solution, and grind for 1min at 1500-2000rpm. Break the phytoplankton algae cells on the filter membrane. After grinding, it is soaked and extracted in the dark at 4℃, and the soaking time is 2h to 24h. Final centrifugation and clarification: Centrifuge at 1000g for 20 minutes or filter, and transfer the supernatant to a stopcock glass vial.

3. Determination method: spectrophotometry, three-color equation to determine the absorbance of 664nm, 647nm, 630nm, 750nm to calculate the chlorophyll a, b, c chlorophyll content. Determination of the corrected content of pheophytin a by monochromatic equation

JXFSTPRP-YLS can process 18×15 mL centrifuge tubes at the same time for rapid cell disruption, cell lysis, and tissue homogenization.

The ground samples include plant roots, stems, leaves, flowers, fruits, seeds and certain animal tissues; especially suitable for the extraction of nucleic acids, proteins and other components in plant tissues. In addition, it can also break yeast, cultured animal cells, bacterial cells, etc. to extract the components.

The three-dimensional integrated oscillation mode makes the sample grinding more uniform and sufficient, the sample repeatability is good, and there is no cross-contamination between the samples. It is a real high-throughput grinding oscillation system. Each sample only takes 1-2 minutes to complete.

For temperature-sensitive samples, Shanghai Jingxin accessories can be selected for cryogenic grinding and storage.


JXFSTPRP-YLS Applicable samples and applications:

1. PCR (polymerase chain reaction) rapid multi-sample grinding preparation

2. Quickly lyse the tissue homogenate, perform nucleic acid extraction, RNA/DNA extraction, and protein extraction

3. Lysis of yeast and bacterial cells

4. Analysis of pesticides/insecticides (testing food residue pesticides or toxic substances in LC/MS/MS sample processing

5. QuEChERS method (pesticide, antibiotic, drug extraction)

6. Extraction of medicinal active ingredients APIs

7. Food safety (contamination, adulteration, food traceability)

8. Biofuel

Main features of surface water chlorophyll tissue grinder:

• For the application of extracting nucleic acid, protein and its analysis components from plant samples, a specially designed grinding machine is carried out

• High throughput: It can grind 8*15ml samples at the same time, and is suitable for the grinding of samples of various sizes, which greatly improves work efficiency

• Each sample only takes 1-2 minutes to complete

• In order to ensure the reproducibility, effectiveness and comparability of the samples, the grinder can set the grinding time, grinding rate and cycle number to ensure the consistency of each grinding and the next grinding conditions, the maximum time is 99 minutes.

• Built-in two safety locks and a sample compartment cover interlock, extremely safe and reliable.

• Experts in grinding animal and plant samples at room temperature and low temperature

• The start and stop buttons allow the user to start or stop the grinding process at any time.

• Optional Shanghai Jingxin cryogenic accessories for cryogenic grinding and storage of temperature-sensitive RNA and protein extraction samples

technical parameter:

model

JX-PS1

JX-PS2

JX-PS3

Feed opening size

Number of bowls

120*1

130*2

130*3

Feeding size(mm)

≤15

≤15

≤15

Discharge size(um)

10-20

10-20

10-20

Production capacity(g)

100

200

300

power

1.1KW (380V)

1.1KW (380V)

1.5KW (380V)

Dimensions(mm)

480*480*730

480*480*730

530*530*920

Weight

110

115

130

Grinding tank capacity

300-3000ml

 

 

Jar material

Stainless steel, agate, tungsten carbide


2021.12.17
净信研磨仪|台州市生态环境监测中心叶绿素A的研磨实验
实验目的:叶绿素a的研磨,本次实验对象为滤膜,后续用来测叶绿素a含量。 客户介绍:台州市环境监测中心站是台州市环境保护局直属单位,为政府管理部门提供环境监测技术支持;
2020.12.21
上海净信全自动样品研磨仪研磨滤纸-检测地表水中叶绿素a的含量
实验目的是检测地表水(湖水、河水等)中叶绿素a的含量,检测标准参照HJ 897-2017行业标准
2020.12.21
水质叶绿素研磨仪-检测地表水中叶绿素a的含量
贯彻执行《中华人民共和国环境保护法》,根据国家和上级监测站要求参与制定有关政策法规和监测技术规范。 参与本地区环境监测规划、计划的制定,并贯彻执行。按照国家环境监测技术规范开展环境质量监测,对辖区内的污染源实施监督监测,对重点污染源建立和健全排污动态档案,编写监测报告。
2022.01.19
水质叶绿素研磨仪|系列操作视频+研磨效果图-上海净信
三维一体震荡模式,使得样品研磨更加均匀、充分,样品重复性好,样品之间没有交叉污染,是真正的高通量研磨振荡系统。每个样品只需要1-2分钟即可完成。
2022.01.19
臼式研磨仪操作视频+研磨效果图-上海净信
臼式研磨仪以仿传统的手工研磨方式为基础,通过研钵和臼杵的摩擦和挤压,从而完成样品的粉碎。由于研磨工具研钵和杵头材质具有多重选择性,能够满足所有应用任务
2022.01.19
冷冻研磨仪系列操作视频+研磨效果图-上海净信
制冷可调节,降温速度快,研磨通量大,研磨效果好,不破坏样品成分,全封闭研磨,重复性稳定,程序可储存
2022.01.19
高通量组织研磨仪系列|操作视频-上海净信
可以进行低温液氮冷冻研磨,也可以进行生物细胞破碎和DNA/RNA提取。高通量组织研磨机可研磨的样品种类包括:植物组织、动物组织、细胞、细菌、芽孢和酵母等。
2022.01.19
三维冷冻研磨仪JXCL-3K操作视频-上海净信
研创的双电机冷冻震荡一体化设计,多年成熟开发的低温高速破碎功能,轻松研磨研磨,专业高效
询价留言
*名称:

单位名称:
*电话:
*联系人:
*城市:
*验证码: