Automatic sample rapid grinding machine

型号:JXFSTPRP-12/16

品牌:Shanghai Jingxin®

规格:PCS

产品简介:Shanghai Jingxin®'s JXFSTPRP-12/16 automatic sample rapid grinder is a special, fast, efficient, multi-test tube consistent system. It can extract and purify the original DNA, RNA and protein from any source.

Shanghai Jingxin® JXFSTPRP-12/16 automatic sample rapid grinder (patented product, counterfeiting must be punished! 201620363493X) is a special, fast, efficient, multi-tube consistent system. It can extract and purify the original DNA, RNA and protein from any source (including soil, plant and animal tissues/organs, bacteria, yeast, fungi, spores, paleontological specimens, etc.).

This machine is also known as multi-sample tissue grinder, rapid tissue grinder, multi-sample tissue homogenizer, and rapid sample homogenization system.

Technical features:

Compared with other existing sample preparation methods, JXFSTPRP-12/16 has the advantages of wide versatility, high efficiency and flexibility. The system avoids the laborious, time-consuming, low-efficiency and many other shortcomings of traditional methods such as grinding, homogenization, and ultrasonic treatment, and can efficiently, quickly and stably lyse and purify nucleic acids and proteins of various types of samples.

Grindable samples:

1. Plant tissue: roots, stems, leaves, flowers, fruits, seeds, etc.

2. Animal tissue: brain, heart, lung, stomach, liver, thymus, kidney, intestine, lymph node, muscle, bone, etc.

3. Fungal bacteria: yeast, E. coli, etc.

4. Food and medicine: all kinds of food, tablets, etc.

5. Volatile samples: coal, oil shale, wax products, etc.

6. Plastics, polymers: PE, PS, textiles, resins, etc.

Operating procedures:

Features:

JXFSTPRP-12/16 uses a special vertical up and down integrated vibration mode, through the high-frequency reciprocating vibration, impact, and shear of grinding beads (zirconia, steel balls, glass beads, ceramic beads). Achieve goals quickly. Make the ground samples more sufficient, more uniform, better sample repeatability, and no cross-contamination between samples

1. The number of operations is large and the effect is good

Efficient and fast work can complete the grinding of 2×24, 2×48, 4×96 samples in 1 minute. Save time and effort, with small differences between batches and within batches. The extracted protein has higher specific activity and longer nucleic acid fragments.

2. No cross contamination

The sample tube is in a fully enclosed state during the crushing process, and disposable centrifuge tubes and beads can be used. The sample is kept in the tube completely to avoid cross-contamination between samples and external contamination. 3. Easy to operate

3.1 The built-in program controller can set parameters such as grinding time and rotor vibration frequency;

3.2 Humanized operation interface.

4. Good stability

4.1 The vertical oscillation method is adopted, so that the grinding is more sufficient and the stability is better;

4.2 During the operation of the instrument, the noise is less than 55dB, which will not interfere with other experiments or instruments.

5. Convenient for low temperature operation

When a low-temperature grinding environment is required, the adapter with the sample can be immersed in liquid nitrogen to cool for 1-2 minutes, and then moved to the host to quickly fix it to start grinding. There is no need to freeze again, which saves liquid nitrogen.

6. Good repeatability

The same procedure is set for the same tissue sample to obtain the same grinding effect. Short working time, sample temperature will not rise

Grinding comparison:

Product parameters:

The main parameters

Parameter range

Application

Tissue homogenization, grinding, cell disruption, homogenization, material dispersion, preparation, sample mixing, shaking

Sample processing:

It can handle 24 samples at the same time in 15 seconds, including liquid nitrogen refrigeration adapters that can be used for 12 and 24 positions

Compatible sample volume:

12*(0.2-0.5ML) /12*2ML /8*(5-15)ML /4*25ML /2*50ML can customize various specifications of grinding tube

Touch screen display:

Touch screen display for convenient and intuitive operation

Storing data:

Ten sets of experimental data can be stored, and animal heart, spleen, lung, kidney, bone, skin, and hair modes are set according to different experimental samples.

Pattern cycle:

According to the set experimental parameters, it can continuously circulate among several set parameters to further reduce the interference of human factors

Anti-vibration principle:

The anti-vibration principle of JXFSTPRP-1, as well as the three-dimensional movement of the grinding bead moving up and down and left and right, ensure the idealization of sample processing and instant crushing effect.

Feed size

No requirement, adjust according to adapter

Discharge size

~5µm

The number of grinding platforms (the number of grinding tanks that can be accepted)

>2

Fastening device with automatic center positioning

Yes

Homogenization speed:

0—70 HZ/sec, working time: 0 second to 99 minutes, users can set by themselves;

Diameter of grinding ball:

0.1-30mm

Grinding ball material:

Alloy steel, chromium steel, zirconia, tungsten carbide, quartz sand;

Accelerate:

Achieve greater speed in 2 seconds

Decelerate

Achieve greater speed in 2 seconds

Noise level:

<55db

Grinding method:

Wet grinding, dry grinding and low temperature grinding are all available

Refrigeration:

Has the ability to upgrade to ultra-low temperature liquid nitrogen refrigeration or air refrigerator refrigeration

Adapter material:

PTFE or alloy steel

Full protection:

Fastening device with automatic center positioning, safety lock when working, full protection

Grinding kit material:

Hard steel, PTFE (Teflon) zirconia

Dimension

450*500*580

Weight

55KG


Basic configuration:

Ø One JXFSTPRP® host

Ø One set of 2ml adapter, one set of 2ml refrigeration adapter, one set of 2ml refrigeration fluid adapter (optional)

 

 

Ø 1000 5MM grinding beads. 1000 5MM ceramic grinding beads

Ø One set of special bead gun (optional)

 

 

Remark:

* The supporting jingxin kit can be used to extract DNA/RNA proteins in samples quickly, efficiently, stably and in batches

* 1HZ=30 rev/sec 1HZ=100RPM

* Conventional adapters can be placed in the refrigerator to provide a cold environment for the samples while working. It can be equipped with an adapter with refrigeration, which can be immersed in liquid nitrogen for more than 30 minutes.

* The noise emission value for the working environment depends on the type of sample and the setting of the grinder. The parameters in the table are in no-load state

* A small amount of samples usually used for DNA and RNA separation can be prepared in disposable centrifuge tubes. Adapters made of polytetrafluoroethylene materials can be used to accommodate 5 or 10 disposable sample tubes for cell disruption. In multi-sample tissue The cell tissue in the grinder is quickly and effectively broken in a very short time, so there is no need for additional low-temperature refrigeration

Experimental case:

1. Test method for grinding corn seeds with Tissuelyser® plant tissuegrinder


2. Test method for grinding citrus peel tissue with Tissuelyser® plant tissue grinder

 

 

Optional accessories:

Shanghai Jingxin is equipped with complete DNA, RNA and protein extraction kits for various samples of animals, plants, microorganisms, etc., which can extract target components quickly, efficiently, stably and in batches.

Extract objects

Jingxin supporting kit

Animal tissue

DNA

jingxin-1

RNA

jingxin-2

Protein

jingxin-3

Plant tissue

DNA

jingxin-4

RNA

jingxin-5

Protein

jingxin-6

Microorganism

DNA

jingxin-7

RNA

jingxin-8

Protein

jingxin-9

2024.10.15
全自动样品快速研磨仪助力骨关节炎发病机制探究
实验目的:全自动样品快速研磨仪将患病小鼠软骨进行研磨,提取蛋白质,分析其中炎症因子的表达情况,与正常小鼠做对比,进一步探究骨关节炎的发病机制。
2024.08.27
高分子材料耐磨界的破局者竟是全自动样品快速研磨仪?
实验目的:做材料表征实验,需要将薄膜材料进行粉碎,粉碎后测试其结构、性能和特性。实验设备:全自动样品快速研磨仪
2024.08.13
全自动样品快速研磨仪在动物组织研磨及RNA与DNA提取中的创新应用
实验目的:选用全自动样品快速研磨仪对动物组织和骨骼进行研磨便于后续实验提取动物组织DNA,RNA和蛋白质等
2024.07.29
全自动样品快速研磨仪能否解决宁波某实验室软糖研磨实验难题
本次实验旨在探索全自动样品快速研磨仪在软糖研磨中的应用潜力,通过液氮辅助的低温研磨技术,旨在提高研磨效率的同时,确保样品的细度满足后续分析的需求。
2024.07.09
全自动液氮冷冻研磨机对小鼠皮肤研磨提取DNA实验效果
实验目的:选用净信全自动液氮冷冻研磨机对小鼠皮肤组织提取DNA样本,方便进行后续实验;实验效果:小鼠皮肤研磨前后对比,研磨后的皮肤组织,肉眼可见研磨充分,没有大块粘连,可放心进行DNA提取,更好地完成后续实验。
2020.12.11
加强型全自动组织研磨仪操作视频-JXFSTPRP-L系列
全自动样品快速研磨仪进口电机、防腐材质、增强型运动轴等多种提升。特殊的三维一体震动模式,更完美的研磨方式,样本研磨更彻底,稳定性更好。
询价留言
*名称:

单位名称:
*电话:
*联系人:
*城市:
*验证码: